Epson 24-Pin Printer User Manual


 
2
Printing on Continuous Paper
2-5
R4C4620
Rev. C
A5 size CONT.FM
6/14/00 Pass 3
R
Proof Sign-off:
SEI Y.Ohkawara T.Takahashi
T.Takahashi
SEI M.Kauppi K.Blair
Use the following table to set the paper thickness lever to match
the thickness of your paper.
* See Appendix C for complete paper specifications.
** Continuous paper with labels cannot be used with the push tractor. To use
them, install the tractor unit in the pull position.
Note:
If the printed image is smeared, you may need to set the paper
thickness lever one position higher to improve print quality.
If the printed image is faint or has many gaps, you may need to set
the paper thickness lever one position lower to improve print quality.
Paper type* Lever position
Ordinary (single sheets or continuous paper) -1 or 0
Carbonless multipart forms with:
2 parts (original + 1 copy)
3 parts (original + 2 copies)
4 parts (original + 3 copies)
5 parts (original + 4 copies)
1
2
3
5
Continuous paper with labels** 2
Postcard 2
Envelopes 2 to 6