Troubleshooting
The print position is not what you expected.
l Printing starts too high or too low on the page, or the bottom part of one
page is printed at the top of the next page.
Reduce or eliminate the top margin with your application
software.
Use your application software to specify the type of paper
you are using (single sheet or continuous) and to set the
lines-per-page setting. These settings take into account the
different requirements of the two printing methods.
Change the TOF position in the default-setting mode. See
“Changing the default settings” on page 3-7.
Also, it is possible to open the printer cover and turn the gear
to make minor adjustments to the loading position for the
current page only. See Chapter 2.
l
All the text is printed on the same line.
Set the auto line feed to on in the default-setting mode so the
printer adds a line-feed code to each carriage return. See
“Changing the default settings” on page 3-7.
l
The text is printed with extra blank lines between the lines of text.
Two line-feed signals are being sent. Set the auto line feed to
off in the default-setting mode. See “Changing the default
settings” on page 3-7.
Line spacing is incorrect. Adjust the line-space setting with
your application software.
l
Page length does not match the length of the paper.
Check the page length set by your application software and
adjust if necessary.
If you are using continuous paper, change the page length in
the default-setting mode. See “Changing the default settings”
on page 3-7.
3-20
Using the Printer