Filter
Top Products
1 Pen tip
2 Attachment for optional strap or cord
3 Battery light
4 Power switch
5 Battery cover
1. To turn on the pen, slide the power switch.
The green light comes on briefly. If the battery is low, the light flashes.
Note: For best performance, hold the pen perpendicular to the board, as shown below. Do not cover
the black section near the tip of the pen.
2. Do the following to use the pen as a mouse:
• To left-click, tap the board.
• To double-click, tap twice.
• To right-click, press the board with the pen for about 3 seconds.
• To click and drag, tap and drag with the pen.
• To move the cursor, hover over the board without touching it.
3. When you are finished using the pen, slide the power switch to turn it off.
Calibrating Automatically
Calibrating Manually
Parent topic: Using the Interactive Pens
111