Filter
Top Products
D
The projection lamp and power lights are flashing at the same time.
An abnormality may have occurred in the projector. Turn off the
projector and unplug the power cord. Then plug the power cord back
in and turn on the projector. If nothing changes, call the service center.
+
Warning: Except as specifically explained in this User`s Guide, do not
attempt to service this product yourself:
Problems with the Image or Sound
D
An
image does not appear on the screen.
Check that the power light is on and the lens cover is off. Also make
sure the cables are installed correctly, as described in Chapter 1.
The correct image source may not be selected. Press the Source button
on the remote control or the control panel to choose another image
source.
D
Only part of the computer image is displayed.
If the computer’s output resolution setting is higher than 800 x 600,
the projector resizes the image. If the computer output is not
compatible with this resizing, choose a different display setting on the
computer. In Windows 3.x, use Windows Setup in the Main program
group. For a Macintosh, choose Control Panels under the Apple menu
and then choose Monitors. In the Monitors screen, choose Options
and make sure Macintosh Hi-Res Display or another 800 x 600 display
is selected. For supported display settings, see page “Supported
Monitor Displays” on page 95.
6 l Troubleshooting