Filter
Top Products
30
Preparing to Install
Configuring the print server is the process of setting it up to work with your
network. This process begins immediately after you install the software, so
it’s important to make sure your print server and printer are set up before you
start installing. You also need to check that your AirPort or other wireless
network adapter(s) and/or access point are installed and ready.
Your EpsonNet 802.11b Wireless Print Server CD-ROM includes WP-
Admin, which lets you configure the print server for AppleTalk and most
other network protocols.
The print server also comes with a built-in web-based configuration utility.
This lets you change configuration settings from any computer on the
wireless network that supports a standard web browser. You must configure
the print server using WP-Admin before you can use the utility.
To use the print server’s web-based configuration utility,
start your web browser and enter the print server’s IP address. For
more information about the web-based utility, visit EPSON’s web site
at support.epson.com.
ZLUHOHVVVHUYHUERRN3DJH)ULGD\0D\30