Filter
Top Products
Troubleshooting
65
Network settings are not restored after cutting the
connection to the computer with EMP NS Connection.
Cannot project with Quick Wireless Connection (When
using the optional Quick Wireless Connection USB Key)
Cannot start this application while EPSON USB Display is
running.
Close USB Display and then start EMP NS Connection.
Cannot start this application while Quick Wireless
Connection is running.
Close Quick Wireless Connection and then start EMP NS Connection.
Cannot connect to the projector using this version of EMP
NS Connection. Install the latest version of EMP NS
Connection.
Install the latest version of EMP NS Connection.
Error Messages Remedy
Check Remedy
Are you manually connecting to a Wireless LAN when the
computer starts up?
Quick Connection Mode
Try connecting to the Wireless LAN manually.
Check Remedy
Is the Wireless LAN unit connected?
For Wireless LAN
Check that the optional Wireless LAN unit is securely connected.
Is the projector turned on? Turn on your projector.
Is the projector information stored in the USB Key? First store the projector information in the USB Key, then connect the USB Key to your computer.
Is the USB Key connected to the computer? Connect the USB Key to the computer. If the USB Key is already connected, disconnect once and then
reconnect it. If projection fails even then, the information stored in the USB Key may have been
erased. Contact Epson. See your User’s Guide for more information.