Filter
Top Products
BTP-M170 User’s Manual
2.2 Paper Specification
2.2.1 Continuous paper
1) Normal paper
¾ Paper width: 76±0.5mm/69.5±0.5mm/57.5±0.5mm
¾ Max. paper roll O/D: Φ83 mm
¾ Paper roll core: Φ12.5mm
¾ Paper thickness: 0.06—0.085mm
2) Multi-layer paper (1 original +2 copies)
¾ Paper width: 76±0.5mm/69.5±0.5mm/57.5±0.5mm
¾ Paper thickness: 0.05－0.085mm,total thickness≤0.2mm
Caution
Use only multi-layer paper (1 original + 2 copies) of which the original layer on contact the
print head thicker than its under-layer.
2.2.2 Marked paper
When using marked paper, the black mark (B/M) must be printed at the obverse side; the
black mark’s reflectivity should be less than 15%, and the other part’s reflectivity should be
more than 85%. There should be no image between the two marks, such as the advertisement.
B/M size should meet the requirement:
5mm<L1(B/M width)<10mm
L2(B/M length)>12mm
20mm<L3(near marks space)<500mm
2.2.3 Recommended paper
Oji paper mfg. Co., Ltd.: Register paper.
Caution:
Please use the recommended paper type or its equivalents. Using other paper types
may affect the print quality or shorten print head lifetime.
Do not paste the paper to the core.
- 4 -