Filter
Top Products
Setting Options Description
DRD All If you are using a Distinctive Ring Service on your
phone line, your telephone company can assign two
Single
or more phone numbers to the same line and assign
Double different ring patterns to each. If you use this
service, select the number of rings for your fax
Triple
number as the DRD setting so your product can
Double&Triple receive faxes on the correct number of rings. All is
the default setting and works for phone lines that do
not use this service.
ECM On Turns on Error Correction Mode (ECM) to
automatically request retransmission of faxes
received with detected errors (default setting).
Off Turns off Error Correction Mode (ECM).
Fax Speed Fast(33,600bps) Transmits faxes at 33.6 Kbps (default setting)
Medium(14,400bps) Transmits faxes at 14.4 Kbps
Slow(9,600bps) Transmits faxes at 9.6 Kbps
Rings to Answer 1 to 9 Sets the number of rings before your product
receives a fax. The default setting is 4. If Auto
Answer is turned on and an answering machine is
connected to the product, make sure this setting is
set higher than the number of rings your answering
machine is set to answer a call.
Dial Tone Detection On Automatically dials the phone number you enter to
send a fax when the product detects a dial tone on
the line.
Off Turns off automatic dial tone detection. This is
necessary if you connected your product to a phone
line on a Private Branch Exchange (PBX) or
Terminal Adapter (TA) system.
Parent topic: Setting Up Fax Features Using the Product Control Panel
Fax Report Options
Select the fax report or list you want to print.
144