Filter
Top Products
The nozzle check pattern is printed.
8. Check the printed pattern to see if there are gaps in the lines.
Print head is clean
Print head needs cleaning
9. Do one of the following:
• If there are no gaps, the print head is clean. Select Done, then press OK.
• If there are gaps or the pattern is faint, use the arrow buttons to select Clean the print head, then
press OK.
10. Follow the instructions on the screen to clean the print head.
If you don’t see any improvement after cleaning the print head up to 4 times, leave the product on and
wait at least 6 hours. Then try cleaning the print head again. If quality still does not improve, one of the
ink cartridges may be old or damaged and needs to be replaced.
Parent topic: Print Head Nozzle Check
Related tasks
Cleaning the Print Head Using the Product Control Panel
Loading Paper in Cassette 2 (Lower Cassette)
Related topics
Replacing Ink Cartridges
206