Filter
Top Products
DEVICE DRIVER INSTALLATION
The Device Driver, EPSON. SYS, is described below.
DEVICE=[drive:\][path\]EPSON.SYS /D:device-name /M: /P: /I: /V
For example:
DEVICE=C:\EPCDROM/EPSON.SYS /D:EPSON00l /M:S /P: 1F0s /I:14 /V
.
[drive:\][path\] specifies the drive and the path name in use.
.
/D: Specifies the device name that will be used in conjunction with the MSCDEX.EXE tile,
so that the MSCDEX.EXE tile can find and communicate with the Device Driver.
.
[/M:S] Specifies the data transfer mode. The only choice is “S” for programmed I/O
.
[/P:X] Specifies the base port address for your interface. Options are 170 and 1F0.
The default is 1F0.
.
[/I:X] Specifies the device
IRQ
assignment. Choices are:
9, 10, 11, 12, 14,
and
15
The default is 14.
.
/V: Verbose mode specifies whether complete setup information is printed to the screen
ATA/IDE Owner’s Manual
13