Filter
Top Products
MSCDEX.EXE INSTALLATION INSTRUCTIONS
MSCDEX.EXE must be included in the AUTOEXEC.BAT tile.
The MSCDEX.EXE will be invoked
each time the system boots up. The syntax is as follows:
C: \ <path> \MSCDEX.EXE / D:<device name. /L:<drive letter>/M:<buffersize>
Example:
C:DOS\MSCDEX.EXE /D:EPSON00l /M: 12
Path-filename
The path where the MSCDEX.EXE tile is located.
Device-name
The same name that was used with the DEVICE DRIVER in the CONFIG.SYS tile.
Buffer Size
Specifies the number of sector buffers. The default is 12.
IL:
Specifies the drive letter to the first CD-ROM drive.
IV:
Directs MSCDEX to display memory statistics when it is loaded.
ATA/IDE Owner’s Manual
14