Epson DFX-900 Printer User Manual


 
26 Options
Options
By adding options such as a pull tractor or perforation cutter, you can further
expand your printer’s capabilities. Optional interface cards are also available to
supplement your printer’s built-in interfaces. (See the Reference Guide for more
information.)
You can purchase ribbon cartridges, paper, and accessories from an Epson-
authorized reseller. For product information and to find the nearest authorized
reseller, please call 800-GO-EPSON (800-463-7766) or browse our catalog of
products at www.epson.com, select the product you are interested in, and
click “Where to Buy.” To purchase online, please visit the Epson Store at
www.epsonstore.com (U.S. sales only). In Canada, please call 800-463-7766 for
a reseller referral.
ENERGY STAR Compliance
Safety Instructions
Hot Parts Caution Symbol
Important Safety Instructions
Read all of these safety instructions before using the printer. In addition, follow
all warnings and instructions marked on the printer itself.
Do not place the printer on an unstable surface or near a radiator or heat
source.
Place the printer on a flat surface. It will not operate properly if it is tilted or
placed at an angle.
Do not block or cover the slots and openings in the printer’s cabinet, and
do not insert objects through the slots.
Use only the type of power source indicated on the printer’s label.
Connect all equipment to properly grounded electrical outlets. Avoid using
outlets on the same circuit as photocopiers or air control systems that
regularly switch on and off.
Do not use a damaged or frayed power cord.
If you use an extension cord with the printer, make sure the total ampere
rating of all devices plugged into the extension cord does not exceed the
cord’s ampere rating. Also, make sure the total ampere of all devices
plugged into the electrical outlet does not exceed the electrical outlet’s
ampere rating.
Unplug the printer before cleaning it, and clean it with a damp cloth only.
Do not spill liquid onto the printer.
Except as specifically explained in the user documentation, do not attempt
to service the printer yourself.
Never replace the print head yourself; you may damage the printer. Also,
other parts of the printer must be checked when the print head is replaced.
You need to move the print head by hand to replace the ribbon cartridge. If
you have just used the printer, the print head may be hot; let it cool for a
few minutes before touching it.
Unplug the printer and refer servicing to qualified service personnel under
the following conditions: if the power cord or plug is damaged, if liquid has
entered the printer, if the printer has been dropped or damaged, if it does
not operate normally or exhibits a distinct change in performance.
Adjust only those controls that are covered by the operating instructions.
As an ENERGY STAR Partner, Epson has determined that
this product meets the ENERGY STAR guidelines for
energy efficiency. The International ENERGY STAR
Office Equipment program is a voluntary partnership with
the computer and office equipment industry to promote the
introduction of energy-efficient personal computers,
monitors, printers, fax machines, copiers, and scanners in
an effort to reduce air pollution caused by power
generation.
K
This symbol is placed on the print head and other parts to indicate
that they may be hot. Never touch those parts just after the printer has
been used. Let them cool for a few minutes before touching them.