Filter
Top Products
b
Press the [ ][ ] buttons on the remote control or the [ ] button
on the control panel to change the test pattern.
Using the remote control Using the control panel
The following image adjustments can be made while the test pattern
is being displayed.
Top Menu Name Sub Menu/Items
Image
Color Mode s p.46
Abs. Color Temp.
Advanced
- Gamma
*
s p.49
- RGB
- RGBCMY s p.49
Reset
Top Menu Name Sub Menu/Items
Signal
Auto Setup
Settings
Geometric Correction s p.43
Extended
Multi-Projection
- Brightness Level
- Edge Blending s p.55
- Multi-screen s p.57
* Except for custom settings of gamma
a
To set menu items that cannot be set while the test pattern is
being displayed or to fine-tune the projected image, project an
image from the connected device.
c
Press the [Esc] button to close the test pattern.
Adjusting the Position of the Projected Image
(Lens Shift)
The lens can be shifted to adjust the position of the projected image, for
example, when the projector cannot be installed directly in front of the
screen.
a
Release the lens shift dial lock.
Installing the Projector
24