Filter
Top Products
Divides the projected image by the grid and corrects the distortion by
moving the point of intersection from side to side and up and down.
a
Press the [Menu] button while projecting.
b
Select Geometric Correction from Settings.
c
Select Point Correction, and then press the [ ] button.
If the message "If this setting is changed, the image may be
distorted."is displayed, press the [
] button.
d
Select Point Correction, and then press the [ ] button.
Point Correction: Performs point correction.
Pattern Color: Select the color of the grid when performing
corrections.
Reset: Resets all corrections for Point Correction to their default
values.
e
Select the number of grid lines (3x3, 5x5, or 9x9), and then press
the [
] button.
f
Use the [ ], [ ], [ ], and [ ] buttons to move to the point you
want to correct, and then press the [
] button.
g
Use the [ ], [ ], [ ], and [ ] buttons to correct distortion.
To continue to correct another point, press the [Esc] button to
return to the previous screen, and then repeat steps 6 and 7.
a
Each time you press the [ ] button, you can show or hide the
image and the grid.
h
When you are done, press the [Menu] button to exit the correction
menu.
Multi-Projection Function
54