Filter
Top Products
a
• You can also set the aspect ratio from the Configuration menu.
s Signal - Aspect p.82
• If parts of the computer image are missing, set the Resolution
setting to Wide or Normal from the Configuration menu, according
to the resolution of the computer.
s Signal - Resolution p.82
Adjusting the Image
Hue, Saturation, and Brightness Adjustment
The Hue, Saturation, and Brightness for each of the R (red), G (green), B
(blue), C (cyan), M (magenta) and Y (yellow) color components can be
adjusted.
Make settings from the configuration menu.
s
Image - Advanced - RGBCMY p.81
Gamma Adjustment
Adjusts differences in the coloring for the projected image that occurs
depending on the connected device.
Make settings from the configuration menu.
s Image - Advanced - Gamma p.81
Select and adjust the correction value
s
Image - Advanced - Gamma p.81
When a smaller value is selected, the dark areas of images become brighter,
but the color saturation for lighter areas may become weaker. When a
larger value is selected, you can reduce the overall brightness of the image
to make the image sharper.
If you select DICOM SIM from Color Mode on the Image menu, select the
adjustment value according to the projection size.
• If the projection size is 120 inches or less, select a large value.
• If the projection size is 120 inches or more, select a small value.
a
Medical images may not be reproduced correctly according to your
settings and screen specifications.
Adjust while viewing the image
s
Image - Advanced - Gamma - Customized - Adjust it from the image
p.81
Adjusting Projected Images
49