Filter
Top Products
Installation
■ ■ ■ ■
18
2. Connect the main cable. The main cable connects the
mouse cable (needed to use the remote control as a
mouse) and serial cable (needed to use the projector
software) from your Macintosh to the projector.
a. Connect the small end of the main cable to the
projector’s Mouse/Com 1 port. The Mouse/Com 2
port is used when you are connecting a second
computer.
b. Connect the MAC mouse cable (9-pin) to the mouse
terminal on the other end of the main cable.
c. Disconnect the mouse cable from the Mouse port of
the Macintosh and connect the mouse connector of
the MAC mouse cable to it.
d. If you are planning to use the projector software,
connect either end of a MAC serial cable to the MAC
serial terminal at the large end of the main cable.
Connect the other end of the MAC serial cable to the
printer port or modem port on the back of your
Macintosh.
MAC mouse cable
MAC serial
cable
Main cable