Filter
Top Products
Installation
■ ■ ■ ■
20
Connecting to a Macintosh PowerBook
Remember that you can only use a PowerBook model that
have video-out capability. See page 7 for more information.
Before beginning, make sure that the projector and
PowerBook are both turned off.
1. Connect the computer cable.
♦
Note:
PowerBook configurations vary. See your computer
manual for the location of the ports needed to connect your EMP
-7300/7200/5300 projector.
a. Connect the other end of the computer cable to the
projector’s Computer 1 port. The Computer 2 port is
used when connecting a second computer.
b. Set the DIP switches of the MAC desktop adapter in
accordance with the resolutions you want to use (i.e.
16” mode).
c. Connect an adapter (which came with the computer or
your own) such as a converter for a D-Sub 15 terminal
to the video output port of your PowerBook.
Computer cable
MAC
desktop
adapter
Video
cable
adapter