Filter
Top Products
Installation
■ ■ ■ ■
22
2. Connect the main cable. The main cable connects the
mouse cable (needed to use the remote control as a
mouse) and serial cable (needed to use the projector
software) to the projector.
a. Connect the small end of the main cable to the
projector’s Mouse/Com 1 port. The Mouse/Com 2
port is used when connecting a second computer.
b. Connect the MAC mouse cable (9-pin) to the
MOUSE terminal on the large end of the main cable.
c. Disconnect the mouse from the computer port, and
connect the MAC mouse cable (4-pin) to this port.
d. If you are planning to use the projector software,
connect either end of a MAC serial cable to the MAC
SERIAL terminal on the large end of the main cable.
Connect the other end of the MAC serial cable to the
Printer port or Modem port on the back of your
PowerBook.
e. Tighten the screws on all connectors to make sure they
are fastened securely.
MAC mouse cable
MAC serial
cable
Main cable