Filter
Top Products
Turning the Equipment On and Off
■ ■ ■ ■ ■
■
31
Turning the Equipment On and Off
Always turn on the projector and its attached equipment in
the following order.
1. Video source
2. Audio source (if different than computer or video source)
3. Projector
4. External speaker or PA system
5. Computer
Turning the Projector On and Off
1. Remove the projector lens cap.
2. Press the Power button on the remote control or control
panel. The green power indicator comes on.
If computer or video equipment is attached, the computer or
video signal is projected.
Allow about 30 seconds for full illumination.
♦
Warning:
Never look into the lens when the lamp is on. This can
damage your eyes. It is especially important that children are not
allowed to look into the lens.