Filter
Top Products
25
Viewing Images at a Preset Image Quality (Memory Function)
Image Quality
Adjustments
Saving image quality adjustments (Save Memory)
The following describes how to save settings.
1 Adjust the desired settings that you would like to save in memory.
2 Select "Save Memory" from the "Memory" menu and then press or .
3 Select a memory name from Memory1 to Memory9 to use for saving and then press or .
The status of a memory area is indicated by the colour of the symbol to the left of the memory name
as follows.
Green : Memory area is in use Grey : Memory area is not in use Orange : Selected
In addition, if the memory has been registered, the colour mode selected when the memory was
registered is displayed on the right side.
If you select a memory area that is already in use and press or , the existing contents will be
erased and the current settings will be saved in their place.
To erase all memory contents, select "Reset Memory" from the "Memory" menu. s page 33
Settings that can be
saved in memory.
Configuration menus
s page 26
This can be used to save adjusted
values for all of the configuration
menu items on the left. The "Save
Memory" command in the
"Memory" menu is used to save
the settings.
Color Mode
Input Adjustment
Color Saturation
Tint
Sharpness
Color Adjustment
Auto Irish
Standard
Advanced
Abs. Color Temp.
Skin Tone
RGB / RGBCMY
Gamma
White Level-Black Level
Brightness/Contrast
Aspect
Zoom Caption
Tracking
Sync.
Position
Advanced
Auto Setup
Vertical Size
Zoom Position
EPSON Super White
Progressive
Output Scaling
Setup Level
DVI-Video Level
"Image" menu "Picture" menu
Displayed for input sources other than
computer
Only displayed for Computer input
(does not appear when signals from
the [HDMI] input port are being input)