Filter
Top Products
11
Setting up
Installing the Projector
* When suspending the projector from a ceiling,
change the configuration menu settings. p.34
Projection methods
When projecting from directly in front
When projecting from a celling
When projecting from the side of
the screen
* Even if projection will be from the screen
side, set up the screen and projector so that
they are parallel.
Configuration menu
Settings
Projection
Front
Front/Ceiling
Avoid setting the projector up in a place which is very dusty or humid, or where there
will be cigarette or other smoke, especially oily smoke.
Clean the air filter at least once every 3 months.
Clean the air filter more frequently if using the projector in a dusty environment.
A special method of installation is required when suspending the projector from the
ceiling (ceiling mount). If it is not installed correctly, it could fall causing an accident
and injury.
If you use adhesives on the ceiling mount to prevent the screws from loosening, or if
you use things such as lubricants or oils on the projector, the projector case may
crack causing it to fall from its ceiling mount. This could cause serious injury to
anyone under the ceiling mount and could damage the projector.
When installing or adjusting the ceiling mount, do not use adhesives to prevent the
screws from loosening and do not use oils or lubricants and so on.
Do not use the projector on its side. This may cause malfunctions to occur.