Filter
Top Products
36
List of Functions
"Settings" Menu
Sub-menu Function
Keystone Corrects vertical keystone distortion in images. sp.i
Auto
Keystone
(EMP-82/62
only)
Sets the function for automatically detecting the projector angle and correcting keystone "On" or "Off" when the projector is tilted vertically.
This function is only enabled when the "Projection" command in the "Extended" menu is set to "Front". If it is set to something other than
"Front", this menu cannot be selected.
Operation
Lock
When set to "On", the operation of all buttons on the projector's control panel except for the [Power] button will be disabled. sp.29
Pointer
Shape
The shape of the pointer can be selected. sp.21
Pointer 1: Pointer 2: Pointer 3:
Brightness
Control
This lets you set the lamp brightness to one of two settings.
Select "Low" if the images being projected are too bright such as when projecting images in a dark room or onto a small screen.
When "Low" is selected, the brightness of the images is reduced, the amount of electricity consumed and noise produced during projection are
reduced, and the lamp's operating life is extended. Also the fan noise is reduced. (Electrical consumption: about an 35 W decrease, lamp life:
about 1.5 times longer, Fan noise: about 20% reduction)
Vo l ume Adjusts the volume. sp.17
Reset Resets all adjustment values on the "Settings" menu to their default settings.
If you would like to return all menu items to their default, see "Reset All". sp.40
Screen shot from EMP-X3 Screen shot from EMP-82/62