Filter
Top Products
66
Connecting to External Output Equipment
Connecting to an External Monitor
Analogue RGB images and RGB video images from a computer that are
being input to the Computer/Computer1 port can be viewed on an external
computer monitor at the same time they are being projected by the
projector, so that the images can be checked at times such as when giving
presentations.
If the images being projected are from a source that is connected to the
Computer2 port, these images cannot be output to an external monitor.
Connect the external monitor using the cable that is provided with the
monitor.
Connecting to an external speaker (when using the
EMP-82/62)
You can connect speakers with built-in amplifiers to the projector's Audio
Out port in order to enjoy a fuller quality of sound.
Use a commercially-available audio cable with pin jack ⇔ stereo mini jack
(3.5 mm) plugs or similar.
Use an audio cable with plugs that match the ports for the external audio
equipment.
•Component video, S-Video, and composite video images
cannot be output to an external monitor.
•The setting gauge for keystone correction and the
configuration menus and help menus are not output to
the external monitor.
Cable provided with monitor To Monitor Out port (black)
Monitor port
When a stereo mini-jack audio cable is inserted into the
Audio Out port, the sound will be output to external
speakers. No sound will be output from the projector's
built-in speaker at this time.
Audio cable
(commercially available)
To Audio Out port
To external audio equipment