Epson EMP-X3 Projector User Manual


 
67
Optional Accessories and Consumables
The following optional accessories are available for purchase if required. This list of optional accessories is current as of September, 2005. Details of accessories
are subject to change without notice. Varies depending on country of purchase.
* A special method of installation is required in order to suspend the
projector from a ceiling. Please contact your dealer if you would like to
use this installation method.
Optional Accessories
Soft carrying case ELPKS16
Use this case if you need to carry the projector by hand.
60" screen ELPSC07
80" screen ELPSC08
100" screen ELPSC10
Portable roll-type screens. (Aspect ratiog 4:3)
50" portable screen ELPSC06
A compact screen which can be carried easily. (Aspect ratio 4:3)
VGA-HD15 PC cable ELPKC02
(1.8 m (6 ft.) - for mini D-Sub 15-pin/mini D-Sub 15-pin)
This is the same as the computer cable supplied with the projector.
VGA-HD15 PC cable ELPKC09
(3 m (9.8 ft.) - for mini D-Sub 15-pin/mini D-Sub 15-pin)
VGA-HD15 PC cable ELPKC10
(20 m (65.6 ft.) - for mini D-Sub 15-pin/mini D-Sub 15-pin)
Use one of these longer cables if the computer cable supplied with the
projector is too short.
Component video cable ELPKC19
(3 m (9.8 ft.) - for mini D-Sub 15-pin/RCA male × 3)
Use to connect a component videog source.
Ceiling mount * ELPMB18
Use when installing the projector on a ceiling.
Ceiling plate* ELPFC03
Pipe 370 (370 mm (14.57 in.)/silver)* ELPFP04
Pipe 570 (570 mm (22.44 in.)/silver)* ELPFP05
Pipe 770 (770 mm (30.31 in.)/silver)* ELPFP06
Use when installing the projector on a high ceiling or a ceiling with
veneer panels.
Consumables
Spare lamp ELPLP34
Use as a replacement for used lamps.
Filter kit ELPAF08
(2 air filters)
Use as a replacement for used air filters.