Filter
Top Products
Safety Instructions
5
❏ Connect your printer to the correct power supply. Your
printer’s power requirements are indicated on a label
attached to the printer. If you are not sure of the power supply
specifications in your area, contact your local power company
or consult your dealer.
❏ If you are unable to insert the plug into the outlet, contact an
electrician.
❏ Do not put your printer where the power cord will be stepped
on.
❏ When using an extension cord, be careful not to exceed its
recommended amperage limit. Also, be sure that all items
plugged into the electrical outlet do not exceed a total of 15
amperes.
❏ Except as specifically explained in this guide, do not attempt
to service this product yourself. Opening or removing covers
that are marked
Do Not Remove
may expose you to high
voltage or other risks. Refer all servicing in those
compartments to a qualified service representative.
❏ Be sure to keep the consumable components out of the reach
of children.