Filter
Top Products
32
Installing the Options
To verify that the ROM module is correctly installed, print a status
sheet. See “Testing the Printer Connection” on page 16.
If the ROM module is not listed under the Hardware
Configurations section of the status sheet, turn off the printer,
unplug it, disconnect all interface cables, and review the steps
above to make sure you installed the module correctly. If the ROM
module still does not show up in the status sheet, contact your
dealer or a qualified service representative for assistance.
Interface Cards
Your printer comes with a Type B interface slot. You can install
an optional interface card into this slot to expand the flexibility of
your printer. For example, installing an optional Ethernet card
turns your printer into a network printer.
Installing
Follow the instructions below to install an optional interface card:
c
Caution:
Before you install the interface card, be sure to discharge any
static electricity by touching a grounded piece of metal;
otherwise, you may damage static-sensitive components.
1. Make sure the printer is unplugged and that all interface
cables are disconnected.