Filter
Top Products
1-4
Setting up the Printer with Your PC
Start.bk
Rev. C
A5 size CHAP1.FM
1/27/99 Pass 0
L
Proof Sign-off:
Miyazaki _______
Yamanouchi _______
Jacqueline _______
Installing on Windows 95, 98, and NT 4.0
Follow these steps to install your printer software:
Note:
If you wish to make a floppy disk version of the printer software
included on your CD-ROM, insert the printer software CD-ROM,
then click
Create Floppy based printer driver/utility disks
and follow the on-screen instructions.
1. Insert the software CD shipped with your printer in the CD-
ROM drive. The Installer dialog box appears.
2. Double-click
Install Printer Driver/Utility
to start the printer
software installation.
3. When the installation is complete, click
OK
.
Note:
❏
If the New Hardware Found screen or any other Wizard appears
when you turn on your computer, click
Cancel
and follow the
steps above.
❏
Installation time varies depending on your computer.
❏
EPSON Status Monitor 2 installation starts automatically.
Click
Cancel
if you do not want to install this utility. If you
want to install it later, see “Software” in the Online Guide.
If you install EPSON Status Monitor 2, your computer will
restart automatically.
For information on opening and using the printer software, see
“Printing From Your PC” on page 3-9. See also “Printer Software”
in your
Online Guide
. If you use your printer on a network, see
“Printing on a Peer-to-Peer Network” on page 1-6.