Filter
Top Products
Disconnect the power cable from the electrical outlet.
Then contact your dealer or the nearest address provided in the "International Warranty
Conditions" section of the
Safety Instructions/World Wide Warranty Terms
booklet.
Check if the lamp is broken.
Disconnect the power plug from the electrical outlet and wait for the lamp to cool down
sufficiently (takes about one hour) before checking.
User's Guide "Replacing the Lamp"
User's Guide
"Reading the Indicators"
The projector is provided with indicators to notify you of
the operating status of the projector.
The following tables show what the indicators mean
and how to remedy the problems that they indicate.
Reading the Indicators
Internal error
Lamp cover is
open error./
Lamp timer
failure/Lamp out
Fan related error
/
Sensor error
If the indicator is flashing or lit red
Problem/Warning
(Temperature) indicator
(Operation) indicator
(Lamp) indicator
lit flashing off
If the problem is still not solved after the lamp is
replaced, stop using the projector and disconnect
the power cable from the electrical outlet. Then
contact your dealer or the nearest address
provided in the "International Warranty Conditions"
section of the
Safety Instructions/World Wide
Warranty Terms
booklet.
Replace the
lamp and
then turn the
power on.
If the lamp
still does not
turn on,
replace it with
a new lamp.
Contact your local dealer for further advice.
If the lamp is
not broken
If the lamp is
broken
Red Red Red
Red Red
Red Red