Filter
Top Products
Adjusting the projection angle
Adjusting the image size and focus
While pulling the foot adjust lever,
lift up the front of the projector so
that the front adjustable foot can
extend. The Auto Keystone
function will operate when the
projector is tilted.
To retract the front adjustable foot,
gently push down on the projector
while pulling the foot adjust lever.
User's Guide "Zoom Function"
"Focus Adjustment"
User's Guide "Height Correction"
Adjusting projected
images
Fitting the image size to the projection screen (Quick Corner)
The four corners of the image can be adjusted so that the image fits
the screen exactly. This cannot be used together with Auto Keystone.
1. Press the button.
Select "Quick Corner" from the "Keystone" sub-menu of the
"Setting" menu.
2. Select the corner to be adjusted.
Press the button.
3. Adjust the corner to the desired position.
Tilt the button.
Once the adjustment is complete, press the button.
User's Guide
"Correcting Keystone Distortion so that the Projection Area Fits the Screen Exactly (Quick Corner)"
If tilted horizontally, adjust using the
left and right rear adjustable feet.
If the height of the image is too short after Auto
Keystone is carried out, adjust the height as follows.
For adjustment using the configuration menus:
"Setting" - "Keystone" - "H/V-Keystone" - "Height"
Focus adjustment
Fine adjustments to
image size
Enlarge: Turn to "W"
Reduce: Turn to "T"
User's Guide
"Adjusting the Feets"
Foot adjust lever
RetractExtend
Rear
adjustable
foot
[ ]:Adjust
[ ] :Move next
[ESC] :Return (Press 1 second
reset)
/