Filter
Top Products
68 - Menu Operations
Effect Bar Sets the color, direction and width of the bar allocated to
the [4] button on the remote control unit.
Press the [Enter] button and select the required item
from the bar setup menu. The color, direction and width
can be selected independently for each of the settings
between 1 and 3.
·The [4] button executes the bar function. The bar types
will be switched between 1 and 3 sequentially for each
time the [4] button is pressed. (see page 59
)
Individual
settings
between types 1
to 3
Cursor Speed Selects the speed of Cursor.
L: Slow M:Medium H:Fast
M
Reset Returns all effect menu adjustment values to the default
values.
Press the [Enter] button and then select [Yes] on the con-
firmation screen displayed.
·Select [Reset All] to return all image and sound values
to the default settings. (see page 70
)
-
Setting Keystone Adjusts images which appear trapezoidal.
·The screen will be reduced in size when keystone
correction has been performed.
·The status of the keystone correction will be recorded.
Perform readjustments that match the installation
position when the projector position or angle have been
changed.
·Reduce the sharpness if blurring occurs after keystone
correction. (see page 66
)
Center value (0)
P in P Sets the input source for the P in P function’s sub-screen.
·The P in P function is executed by pressing the [PinP]
button on the remote control unit. (see page 60
)
Composite
No Signal Msg The status for [No Image Signal Input] and other mes-
sage display.
·The user logo must be registered and set up before it
can be amended.
Blue
Prompt Sets whether to display the input source on the screen or
not.
ON
A/V Mute Sets up the screen status for when the [A/V Mute] but-
ton is pressed.
·User logos must be registered and set up before they
can be amended.
Black
BNC Sets the mode for the input image signals connected to
the BNC port.
RGB: Set when the input is a RGB signal.
YCbCr: Set when the input is a component video signal
(YCbCr).
YPbCr: Set when the input is a component video signal
(YPbCr).
RGB
Top Menu Sub Menu Function Default Value