Filter
Top Products
74 - Troubleshooting
Lamp Indicator
Blinking in Green Warm-up in
progress
(Not an error)
·Wait for a moment.
·The green lamp will stop blinking and
become illuminated once the warm-up
procedure has been completed.
41
Illuminated in Red Internal error Cease operations, remove the Power Plug from
the socket and contact your dealer or nearest
address provided at page 96
and request
repairs.
Extinguished The power is not
switched on
The power is not switched on.
·Check the power cord connection.
·Check the power supply to the socket.
41
Indicator Status Cause Recovery and Status Reference
Page
Blinking in Red Lamp error ·Replace with a new lamp (ELPLP12).
·If the lamp is broken, take care to avoid injury
and contact your nearest address provided at
page 96
Center to request repairs.
·Ensure that the lamp and lamp cover have
been attached firmly after replacing the lamp.
The equipment is fitted with a mechanism
that prevents the lamp from being switched
on if the lamp and lamp cover are not
securely in place.
86
Blinking in Orange Time to replace the
lamp.
Replace with a new lamp (ELPLP12). 86
Extinguished (Not an error)
The power has not been switched on or nor-
mal projection is in progress.
Indicator Status Cause Recovery or Status Reference
Page