Filter
Top Products
88 - Replacing the lamp
5
Attaching the lamp cover.
First attach the hook on the left side of the lamp cover, and then the right. Snap the cover
into place and secure with the screw.
Point
· Attach the lamp and lamp cover firmly. The power will not be reinstated unless the lamp
and lamp cover are set firmly in place.
· A replacement Air Filter is packaged with the replacement lamp. Replace the Air Filter at
the same time as replacing the lamp.
· Ensure that the lamp illumination time is reset in accordance with the following procedure
after the lamp has been replaced with a new one.
Resetting the lamp illumination time
1
Press the [Help] button for five or more consecutive seconds.
The screen for resetting the lamp's illumination time will be displayed after the help menu
has been displayed.
2
Select [Yes]
Press the [Tracking +, -] on the main unit (lower the [Enter] button on the remote control
unit) and select [Yes].
3
Execution
Press the [ (Enter)] button on the main unit or the [Enter] button on the remote control
unit to execute the process.
Video
Computer
A/V mute
Resize
Esc Help
Menu
Tracking Tracking
Sync
Sync
Shift
Keystone
Volume
Power
Help
Help
Esc
Menu
Comp1
P in P Preset
Video
Comp2/BNC
Help
- Volume +
Auto
Resize
Reset Lamp ON Time
Do you reset the Lamp ON Time?
Yes No
:Select :Execute