Filter
Top Products
21
If the computer has a standard DVI or DFP -compliant digital video card or
video output port, use an optional digital video cable or DVI analog cable to
connect the monitor port of the computer to the Computer 1 port at the rear of
the projector. The type of connection cable used will vary depending on the
specifications for the computer's monitor port.
See “Appendix: Optional Accessories” (P.100)
Tip :
• You may need to change the computer settings when switching the computer output to
digital RGB. Refer to the documentation for the computer for details.
• If you are connecting a computer with a mini D-Sub 15-pin output port to the projector
at the same time, connect the computer with the mini D-Sub 15-pin output port to the
Computer 2/Component Video port of the projector.
• After making the connections, change the Comp1 Input setting in the Setting menu to
Digital-RGB. (P.69)
If the monitor port is a digital RGB connector
To digital RGB
output port
To Computer 1 port
Digital video cable or DVI analog cable
(optional)