Filter
Top Products
37
R4C626
short.bk Rev_D
A5 size MAINT.FM
9/8/00 Pass 0
L
Proof Sign-off:
Otsuka _______
N.Nomoto _______
R.Thomson _______
1. Make sure that A4 or Letter size plain paper is loaded in the
sheet feeder.
2. Click the
Utility
tab in the printer driver, then click the
Print
Head Alignment
button.
3. Follow the on-screen instructions to align the print head.
For DOS users
Follow the steps below to align the print head.
1. Insert the printer software CD in your CD-ROM drive.
2. Type
D:\SETUP
at the DOS prompt. (If your CD-ROM drive
is assigned a drive letter other than "D", or if you are using the
floppy disk version, substitute the appropriate letter.)
3. Press the
Enter
key, then follow the on-screen instructions.
4. After running the setup program, type
C:\EPCALIB2
. (If your
hard drive is assigned a drive letter other than “C”, substitute
the appropriate letter.)
5. Press the
Enter
key. The following window appears.