Filter
Top Products
Paper Handling 11
1
1
1
1
1
1
1
1
1
1
1
1
1. When printing is finished, the printer advances the
perforation of the final printed page to the tear-off position.
Tear off all printed pages using the tear-off edge of the printer
cover.
Note:
If your paper’s perforation is not properly aligned with the tear-off
edge, you can adjust the tear-off position using the Micro Adjust
function as described in “Adjusting the tear-off position” on page
19.
2. When you resume printing, the printer feeds the paper back
to the top-of-form position and begins printing.
Removing continuous paper
Follow these steps to remove continuous paper from the printer:
1. When the auto tear-off function is on, the printer advances the
paper to the tear-off position automatically.
2. Tear off the printed pages.
3. Press the Load/Eject button to feed the continuous paper
backward out of the printer and into the standby position.
4. To completely remove continuous paper from the printer,
open the sprocket covers. Remove the paper from the tractor
unit, and then close the sprocket covers.
tear-off edge