Filter
Top Products
38 Control Panel
Buttons and Lights
1 LF/FF button
❏ Feeds paper line by line when pressed shortly.
❏ Ejects a single sheet or advances continuous paper
to the next top-of-form position when held down
for a few seconds.
2 Micro Adjust
When you hold down the Pause button for three
seconds, the printer enters the Micro Adjust mode. In
this mode, you can adjust the top-of-form and tear-off
positions by pressing the LF/FFD and Load/EjectU
buttons. See “Using the Micro Adjust Function” on
page 19.
3 Load/Eject button
❏ Loads a single sheet of paper.
❏ Ejects a single sheet of paper if a sheet is loaded.
❏ Loads continuous paper from the standby
position.
❏ Feeds continuous paper backward to the standby
position if a sheet is loaded.
Power
LF/FF Load/Eject
Micro Adjust
3sec
Paper Out Pause