Filter
Top Products
44 Control Panel
0 slash
Select the zero character with a slash ( ) (this feature is on) or
without a slash (0) (this feature is off). The slash allows you to
easily distinguish between the uppercase letter “O” and a zero.
High speed draft
When high speed draft is on, the printer prints up to 300 cps
(characters per second) at 10 cpi (characters per inch), or 360 cps
at 12 cpi. When it is off, the printer prints 225 cps at 10 cpi, or 270
cps at 12 cpi.
I/F (interface) mode
For LQ-630 users, you can choose AUTO (automatic), Parallel, or
USB for the interface mode. For LQ-630S users, you can choose
AUTO (automatic), Serial, or USB for the interface mode. When
you select Auto, the printer automatically selects the interface that
is receiving data, and uses that interface until the end of the print
job. The Auto setting allows you to share the printer among
multiple computers without changing the interface mode.
If only one computer is connected to the printer, you can select
Parallel, Serial or USB, depending on which interface your
computer uses.
Auto I/F (interface) wait time
When the printer is in the auto interface mode and it receives no
data from the currently selected interface for the amount of time
specified with this setting, it determines which interface is
receiving data and switches to that interface. You can specify
either 10 seconds or 30 seconds for the auto interface wait time.
Parallel I/F (interface) bidirectional mode (For LQ-630 only)
The Parallel Interface bidirectional transfer mode is used when
this feature is on. If bidirectional transfer mode is unnecessary,
turn this off.