Filter
Top Products
B-2 Cleaning and Transporting the Printer
Cleaning the Printer
To keep your printer operating at its best, you should clean it
thoroughly several times a year. To clean your printer, follow
these steps:
1. Remove any paper loaded in the printer. Make sure the
printer is turned off.
2. Remove the paper guide. If an optional cut-sheet feeder is
installed, remove it.
3. Use a soft brush to carefully brush away all dust and dirt from
the outer case and paper guide.
4. If the outer case or paper guide is still dirty or dusty, clean
them with a soft, clean cloth dampened with mild detergent
dissolved in water. Keep the printer cover closed to prevent
water from getting inside the printer.
Caution:
❏ Never use alcohols or thinners to clean the printer; these
chemicals can damage the printer components as well as the
case.
❏ Be careful not to get water on the printer mechanism or
electronic components.
❏ Do not use a hard or abrasive brush.
❏ Do not spray the inside of the printer with lubricants;
unsuitable lubricants can damage the printer mechanism.
Contact your EPSON dealer if you think lubrication is
needed.