Epson 1700C Projector User Manual


 
74 Solving Problems
2. Adjust the
Tracking to eliminate vertical bands.
3. Adjust the
Sync setting to increase the image sharpness.
The image is too light or dark, or colors are incorrect.
If you’re displaying a computer image, use the Color Mode
option in the projector’s Image menu to adjust the color (see
page 46).
If you’re displaying video, adjust the Color Adjustment and
Color Mode settings on the Image menu. You can also try
adjusting the
Color Saturation, ABS Color Temp, and Tint
settings on the Image menu.
Try adjusting the Brightness and Contrast settings on the Image
menu.
Check your computer display settings to correct the color balance.
The projector’s lamp may need to be replaced. See page 60 for
instructions.
There is no sound, or the sound is not loud enough.
Press the button on the projector or remote control to increase
the volume.
Make sure A/V Mute is not enabled. (The A/V Mute button may
have been pressed.)
Make sure the A/V Mute Slide is open.
note
Because of the different
technologies used, your
projected image may not
exactly match the colors on
your notebook or computer
monitor.