Filter
Top Products
1-22
Setting Up the Scanner
PapU-U
Rev. C
A5 size CHAP1.FM
2/1/00 Pass 0
L
Proof Sign-off:
E.Omori _______
<leadername> _______
<editorname> _______
2. Connect the other end of the cable (Type A) to the USB port
on your computer, or USB hub.
Note:
❏ USB cables enable you to connect the scanner whether your PC is
on or off. If you connect the scanner while your PC is on, the “Add
New Hardware Wizard” dialog box will appear. When this happens,
follow the instructions in Chapter 1 of your scanner software
manual, then install the software.
❏ Connect the USB cable to your PC, then install or start the scanner
software following the software manual. Do not connect or
disconnect the USB cable while the scanner software is open.