Epson LX-80 Printer User Manual


 
ESC Dec
Hex
ESC 42
2A
ESC 45
ESC 47
2F
ESC 48
30
0
ESC 49
31
1
ESC 50
32
2
ESC 51
33
3
ESC 52
34
4
ESC 53
35
5
ESC 56
38
8
ESC 57
39
9
ESC 58
3A
ESC 60
2D
3C
Symbol
::.
-
<
Function
Turns graphics mode ON. Format:
ESC “v’ m n
l
n
2
followed by n data numbers, where
n = total number of dot columns,
nl
= n MOD 256,
n2
= INT (n/256),
m selects mode O-6.
See Chapter 9 for modes.
Turns underline mode ON. Format:
ESC
“-”
n
where n toggles underline on and off:
0 turns it OFF, 1 turns it ON.
Selects a vertical tab channel. Format:
ESC “/” n
where n = 0-7.
Sets line spacing to 1/8-inch (9-dot).
Sets line spacing to 7/72-inch (7-dot).
Returns line spacing to the default of
1/6-inch (12-dot).
Sets line spacing to n/216-inch
(1/216-inch is 1/3-dot). Stays on until
changed. Format:
ESC "3" n
where n = O-255.
Turns italic mode ON.
Turns italic mode OFF.
Disables the paper-out sensor. Can
also be disabled with DIP switch l-5.
Enables the paper-out sensor. Can
also be enabled with DIP switch l-5.
Copies the ROM character set to
RAM. Format:
ESC
:”
n
l
n
2
n
3
where n
l
, n
2
, and n
3
are all 0. They
are included for future expansion.
The RAM character set must be acti-
vated with ESC “%“.
Turns one-line unidirectional mode
ON. Prints each line from left to
right.
B-4