Filter
Top Products
2
Printing on Continuous Paper 2-11
4. Slide the left sprocket to the left margin of your paper using
the arrow mark inside the printer. (Printing starts at the arrow
mark.) Then pull the lever forward to lock it in place.
Note:
See “Paper alignment” and “Printable area” in Appendix C for
more information on the left margin position.
5. Slide the right sprocket to match the width of your paper, but
do not lock it. Move the paper support midway between the
two sprockets as shown above.
6. Open both sprocket covers. Make sure your paper has a
clean, straight edge and fit the first four holes of the paper,
printable side up, over the tractor pins. Then close the
sprocket covers.