Filter
Top Products
2
Printing on Continuous Paper 2-29
Removing paper from the pull tractor
1. After you finish printing, tear off the fresh supply of paper at
the perforation nearest the paper entry slot.
2. Hold down the
LF/FF
button to eject the paper from the printer.
Using two tractors in a push and pull combination
To improve continuous paper feeding and reduce paper jams, you
can use two tractors at the same time. When using two tractors in
combination, you can load paper in the front paper slot onto both
the front push tractor and the pull tractor, or in the rear paper slot
onto both the rear push tractor and the pull tractor.
To use the front push tractor with the pull tractor, you need to
purchase the optional pull tractor (C80032
✽
). The tractor in the rear
push position cannot be removed. Install the optional pull tractor as
described in “Installing the tractor in the pull position” on page 2-22.
To use the rear push tractor with the pull tractor, you can remove
the tractor from the front push position as described on page
2-15, and install it in the pull position as described on page 2-22.
Note:
The tractor in the rear push position cannot be removed.