Filter
Top Products
Adjusting the Screen Image
12
Adjusting the Screen Image
You can correct and adjust the screen image to obtain the best possible picture.
The size of the projected image is basically determined by the distance from the projector to the screen.
(Quick Setup poster)
If further minor adjustment is required, press the [Zoom] button on the projector's control panel to make the
adjustment. Minor adjustments can be made to the image size to between a zoom ratio of approximately
1.0 to 1.2 in 33 steps.
Procedure
Procedure
Turn the focus ring to adjust the image
focus.
Adjusting the Image Size
The E-Zoom function lets you enlarge parts of the image. (p.32)
Focusing the Screen Image
•
If the surface of the lens is dirty or has
condensation on it, it may not be possible
to adjust the focus correctly. If this
happens, clean the lens. (p.38, 46)
•
If the projector is positioned outside the
normal projecting range of 0.9–11.3 m
(2.9–37.0 ft.), it may not be possible to
get the correct focus. If you have trouble
getting the correct focus, check the
projection distance.
Press the [Zoom] button on the
projector's control panel.
When pressed to the [W] side, the image
becomes larger.
Projector
Projector
When pressed to the [T] side, the image
becomes smaller.
Focus ring