Filter
Top Products
Using the Configuration Menu Functions
26
Color Mode
Prompt
Controls whether the color mode prompt is displayed on the screen when the
color mode is changed.
ON
A/V Mute Sets the appearance of the screen when the [A/V Mute] button on the remote
control is pressed.
Black
Sleep Mode Sets the energy saving operation when no signal is being input.
•
When set to ON, projection stops automatically, and then after the cool-
down period, if no operations are carried out for 30 minutes, the projector
goes into sleep mode. The Power indicator lights orange.
•
Projection starts again when you press the [Power] button on the projector's
control panel or the remote control.
ON
Reset Resets all values for the Setting menu to their default settings.
•
Press the [Enter] button to display the confirmation screen, and select Yes.
•
Select Reset All to return all menu settings–including settings for the Video
and Audio menus–to their default settings. (p.28)
-
Advanced Menu
Sub-menu Function Default
Language Sets the language for message displays.
•
Press the [Enter] button and select the language from the selection menu that
appears.
English
Color
Adjustment
Adjusts the color temperature
and intensity of each RGB color for each input
source.
•
Color Temp. Lets you adjust bright colors within a range from reddish tinges
to bluish tinges.
If the color temperature is lower, colors appear reddish and
color tones appear softer.
If the color temperature is higher, colors appear bluish and
color tones appear sharper.
Press the [Enter] button and make the adjustment in the sub-
menu that appears.
•
RGB Sets the color intensity for each RGB (red/green/blue) color in
the image.
Press the [Enter] button, select R (red), G (green) or B (blue)
and make the adjustment in the sub-menu that appears.
You can adjust the colors while viewing the results on the
screen.
(This item cannot be selected if sRGB has been selected as the Color Mode
setting in the Video menu.)
Color
Temp.:
Depends on
connection
Rear Proj. Use when projecting images from behind a translucent screen.
When set to ON, the projected images are horizontally reversed.
OFF
Ceiling Use when installing the projector on the ceiling. When set to ON, the projected
images are horizontally and vertically reversed.
OFF
Sub-menu Function Default
: Select : Enter
Video
Audio
Setting
Advanced
About
Reset All
Color Adjustment
Color Temp. RGB
Rear Proj .
Ceiling ON OFF
Language
Select [English]
Reset
Execute
Adjust
ON OFF
:
:
: