Filter
Top Products
50 Summary of Panel Settings
Layout Borderless Prints your photo all the way to the edges of the paper.
Note:
Your image is slightly enlarged and cropped to fill the sheet
of paper. Print quality may decline in the top and bottom
areas of the printout, or the area may be smeared when
printing.
With Border Prints your photo with a white margin at the edge.
Upper 1/2 Prints your photo on the upper half of the paper.
12-up Prints 12 photos.
Movie Enhance Off, On Adjusts the image and improves its quality when set to On.
This option is only available when the Print Method is set
to Print 1 Frame.
Quality Draft, Standard, Best -
Filter Off, Sepia, B&W -
Enhance PhotoEnhance, None Select PhotoEnhance to adjust the brightness, contrast,
and saturation of your photos automatically.
Select P.I.M. to use your camera's PRINT Image Matching
or Exif Print settings.
Brightness Brightest, Brighter,
Standard, Darker,
Darkest
-
Contrast Standard, Higher,
Highest
-
Sharpness Sharpest, Sharper,
Standard, Softer,
Softest
-
Saturation Highest, Higher,
Standard, Lower,
Lowest
-
Fit Frame On, Off Select On, to automatically crop your photo to fit inside the
space available for the layout you selected. Select Off to
turn off automatic cropping and leave white space at the
edges of the photo.
Bidirectional On, Off Select On to increase the print speed. Select Off to
improve the print quality (but your photos print more
slowly).
Expansion Standard, Mid., Min. Select the amount the image is expanded when you select
Borderless.
Standard: The image is slightly enlarged and cropped to
fill the sheet of paper.
Mid: Margins might be printed. (Low expansion rate.)
Min: Margins might be printed. (Lowest expansion rate.)
Menu Setting Item Description