Filter
Top Products
Basic Operations 94
Note that any settings already saved to the printer will be overwritten.
Setting Name
Name the media setting bank. Using distinctive names makes it easier to select banks for
use.
1. Select Setting Name and press the Z button.
2. Use the d/u buttons to display letters and symbols. When the desired character is
displayed, press the r button to select the next entry position.
Mistakes can be erased by pressing the l button to delete the previous character and
move the cursor back one spot.
3. After entering the name, press the Z button.
Feed Adjustment
Feed Adjustment is used to correct banding (horizontal banding, lines, or strips of uneven
color).
The Feed Adjustment menu contains two options: Auto and Manual.
Auto feed adjustment adjusts the feed automatically using data collected by a sensor while
a test pattern is printed.
In manual feed adjustment, the user visually inspects print results and enters a correction
by hand.
This section details the steps involved in auto feed adjustment.
Adjust the feed manually if you feel that auto feed adjustment has not completely resolved
the problem.
For more information on manual feed adjustment, see “Feed Adjustment (Manual Feed
Adjustment)” on page 103.