Filter
Top Products
Basic Operations 51
Printable side in
4. Place the left edge of the media in any of the black squares on the bar in back of the
printer and the right edge on any of the holes on the back of the printer.
The recommended positions for media of different widths are shown below.
See “Positioning Media of Different Widths” on page 107.
Note:
Be sure the option selected for Roll Type in the Customize Settings menu matches how
the media is rolled. Roll Type defaults to Printable Side Out. Be sure to select Printable
Side In after loading media rolled printable side in.
For more information, see “Roll Type” on page 98.
Note:
If the label with black squares is not in place, affix the label as described in the Setup
Guide.