Filter
Top Products
5. If paper is caught in the paper eject area, gently pull it out
of the printer.
6. Close the printer cover.
7. Turn on the printer to move the print heads to the correct
positions.
8. Adjust the left and rear paper edge guides.
If you have frequent paper jams, try the following:
❑ Use a higher-quality paper, one that is not too thin or
rough. Make sure it is suitable for ink jet printers. Also,
thicker paper should be fed one sheet at a time. See
Chapter 3 for more information about loading paper.
❑ Fan the stack of paper before you load it.
❑ Do not load too many sheets in the input tray. You can
load up to 100 sheets of plain paper, 70 sheets of special
coated paper, or 50 sheets of transparency film.
Paper feeding problems
If paper is not feeding properly, the most likely causes are the
following:
❑ Paper is curled or folded. Use flat, nondamaged paper.
❑ Too many sheets are loaded in the input tray. Do not load
more than 100 plain paper sheets or more than 70 special
coated sheets.
❑ The paper is too thin or thick. See Appendix B for exact
specifications.
❑ The edge guides are too tight or too loose. Adjust the edge
guides for the size of the paper.
Maintenance and Troubleshooting
4-13