Filter
Top Products
Commands 5-7
(For slip paper)
•The
n
L
and
n
H
indicate the number of dots of the bit image in
the horizontal direction. The number of dots is calculated by
n
L
+
n
H
× 256.
• If the bit-image data input exceeds the number of dots to be
printed on a line, the excess data is ignored.
•
d
indicates the bit-image data. Set a corresponding bit to 1 to
print a dot or to 0 to not print a dot.
ESC - n
[Name] Turn underline mode on/off
[Format] ASCII ESC -
n
Hex 1B 2D
n
Decimal 27 45
n
[Range] 0 ≤
n
≤ 2, 48 ≤
n
≤ 50
[Description] Turns underline mode on or off, based on the following values of
n
:
• If slip paper is selected, the underline is printed with 1-dot
thickness even if
n
is specified as 2 or 50.
ESC 2
[Name] Select default line spacing
[Format] ASCII ESC 2
Hex 1B 32
Decimal 27 50
[Description] Sets the line spacing to 1/6 inch.
ESC 3
n
[Name] Set line spacing
mMode
Number of
Bits for
Vertical
Data
Horizontal Direction
Number of Data
(K)
Dot
Adjacency
Number
of Dots
0 8-dot single-density 8 Available 400 n
L
+ n
H
× 256
1 8-dot double-density 8 Not available 800 n
L
+ n
H
× 256
nFunction
0, 48 Turns off underline mode
1, 49 Turns on underline mode (1-dot thick)
2, 50 Turns on underline mode (2-dots thick)